Scale By Chris Wraith Drop Bed & Fuel Cell Insert

Add a custom storage and scale-detail element to your Wraith or Wraith 1.9 with the Scale By Chris Wraith Drop Bed & Fuel Cell Insert. The 3D-printed drop bed fits between the shock mounts and installs with M3 hardware through the shock mounts.

Fuel cell and roto can details fill the open area at the back of the cage, while the 52x53mm center area and smaller spaces on the right and left provide room for additional accessories. The fuel cell can also house an ESC, receiver, light controller, or other electronic device for a cleaner installation.

Product Details

• Designed for Wraith or Wraith 1.9
• 3D printed at .2mm layer thickness with 20% infill
• Fuel cell and roto can details
• 52x53mm open center area
• Small storage areas on the right and left sides
• Printed and hand detailed in house

Some light finish work may be needed to remove excess material from 3D printing. Use a sharp hobby knife carefully to remove small strings and straggler layer lines as needed.