UDI RC 2S LiPo Battery (7.4V/2000mAh) w/Tamiya Connector

The UDI RC 2S LiPo Battery provides 7.4V and 2000mAh capacity for the Xiphactinus 17” platform or other compatible platforms with a Tamiya connector. It includes an XH balance connector and is configured as 2S1P.

Specifications

• Nominal Voltage: 7.4V (2S)
• Capacity: 2000mAh
• Maximum Charge Rate: 1C (2.5A)
• Cell Configuration: 2S1P
• Watt Hours: 14.8Wh
• Connectors: Battery: Tamiya; Balance: XH
• ROAR Approved: No
• Dimensions (LxWxH): 2.66x1.4x0.7in (67x36.4x18.6mm)
• Weight: 3.65oz (103g)
• Discharge Rates: Continuous: (Not Available); Peak: (Not Available)

Includes

• (1) 2S LiPo Battery (7.4V/2000mAh) w/Tamiya Connector

LiPo Safety

• Use a Li-Poly specific charger; NiMH or NiCD chargers will not work.
• Always balance charge the battery and use a LiPo Safe charging bag or box.
• Do not leave the battery in the model or leave lithium batteries unattended while charging.
• Do not over-discharge or over-charge the battery. The end voltage cannot be lower than 3.2V per cell.
• Do not expose the battery to sunshine or store or charge it above 35°C or in a closed car.
• If the battery becomes hot, allow it to cool completely for about 20 minutes before inspection and recharging.