Team Exalt "X-Rated" 1S 200C Low "IR" Hardcase LiPo Battery

The Team Exalt "X-Rated" 1S 200C Low "IR" Hardcase LiPo Battery provides a 3.7V, 8200mAh power solution with a 200C continuous discharge rating. This pack features Silicon Graphene construction, low internal resistance, a flat discharge curve, and 5mm high-amp bullet connectors.

Features

• 8200mAh capacity
• 200C discharge rating
• 1S LiPo configuration
• Silicon graphene construction
• Low internal resistance
• Flat discharge curve
• High voltage output
• Reduced operating temperatures
• 5mm high-amp bullet connectors
• ROAR, EFRA, and BRCA approved
• IFMAR Approved

Specifications

• Nominal Voltage: 3.7V (1S)
• Capacity: 8200mAh
• Maximum Charge Rate: 1C
• Continuous Discharge: 200C
• Peak Discharge: -
• Cell Configuration: -
• Watt Hours: 30.34Wh
• ROAR Approved: Yes
• Battery Connector: 5mm
• Balance Connector: 2mm Bullet
• Dimensions (LxWxH): 3.66x1.85x0.72in (93x47x18.5mm)
• Weight: 5.86oz (166g)

Includes

• (1) "X-Rated" 1S 200C Low "IR" Hardcase LiPo Battery (3.7V/8200mAh) (ROAR Approved)
• (2) 5mm Bullet Connectors

Lithium Polymer Battery Safety

• Do not leave the battery in your model when charging.
• Do not leave lithium batteries unattended while charging.
• Always balance charge lithium batteries using a Li-Poly specific charger.
• Always use a LiPo Safe charging bag or box.
• Do not over-discharge or over-charge the battery.
• Discharging capacity cannot exceed 80% of the pack's maximum capacity after full charging.
• Do not use NiMH or NiCD-only chargers.
• The end voltage cannot be lower than 3.2V per cell.
• Do not expose the battery to sunshine or store or charge it above 35°C or in a closed car.
• If the battery becomes hot during charging, discharging, or racing, allow it to cool completely before inspection and recharging.
• Read and understand the instructions before operating this battery.