Scale By Chris Toyota SR5 Glue In Tail Light Buckets (Pro-Line SR5)

Add a detailed lighting finish to your Pro-Line SR5 body with the Scale By Chris Toyota SR5 Glue In Tail Light Buckets. These 3D printed buckets are designed for 5mm LED lights and measure approximately 39x25.5x10.5mm.

Product Details

• Designed for the Pro-Line SR5 body
• Uses 5mm LED lights
• Approximate dimensions: 39x25.5x10.5mm
• Precision printed at .2mm layer thickness with 20% infill
• Secure with rubberized glue or silicone

Installation Notes

Leave the tail light area on the body clear during installation. After painting, mask the individual brake light and blinker sections, then use clear red and yellow candy colored paints for the lens areas. Once the paint has dried, use silicone to secure the light bucket and shoe goo or similar adhesive to hold the 5mm LED lights in place.

Some light finish work may be needed to remove excess material from the 3D printed parts. Carefully remove small strings and stray layer lines with a sharp hobby knife as needed.