Scale By Chris SCX10 II Glue In Tail Light Buckets (AXID9047)

Add a finished scale detail to your Axial AXID9047 with Scale By Chris SCX10 II Glue In Tail Light Buckets. These 3D-printed light buckets are designed for 5mm LED lights and measure approximately 39x20.5x15.5mm.

Product Details

• For Axial AXID9047
• Designed for 5mm LED lights
• Approximately 39x20.5x15.5mm
• Precision printed at .2mm layer thickness with 20% infill
• Secure with rubberized glue or silicone

Installation Notes

• Leave the tail light area on the body clear during installation.
• Mask the tail light area before painting so the lens area remains clear.
• After painting, mask the individual brake light and blinker sections, then use clear red and yellow candy colored paints for the lens areas.
• After the paint dries, use silicone to glue the light bucket in place.
• Install 5mm LED lights with shoe goo or similar adhesive.

As with most 3D-printed items, some light finish work may be needed to remove excess material. Use a sharp hobby knife to carefully remove small strings and stray layer lines as needed.