Scale By Chris Pro-Line 80s Chevy Glue in Loaded Taillight Buckets w/LEDs

Add 3D-printed lighting detail to a Pro-Line 80s Chevy truck (PRO3248-00) or 80s Chevy Blazer (PRO3244-00) with these glue-in taillight buckets from Scale By Chris. Each bucket includes pre-installed red 12V 5mm LED brake lights with open-ended wiring, plus an open hole for optional 3mm reverse lights.

Product Details

• Designed for Pro-Line 80s Chevy truck (PRO3248-00) or 80s Chevy Blazer (PRO3244-00)
• 3D printed at .18mm layer thickness with 20% infill
• Pre-installed red 12V 5mm LED brake lights
• Open-ended LED wiring allows you to install the connector you prefer
• Open hole for optional 3mm reverse lights
• Secure the buckets with rubberized glue or silicone

Installation Notes

• Leave the taillight area on the body clear during installation.
• Mask the taillight area so the lens area remains clear when painting the body.
• After painting, mask the individual brake light and blinker sections, then use clear red and yellow candy-colored paints for the lens areas.
• After the paint has dried, use silicone to glue the light bucket in place.
• Install the 5mm LEDs using shoe goo or similar adhesive to hold them securely.
• Some light finish work may be needed to remove excess material from 3D-printed parts. Carefully remove small strings and stray layer lines with a sharp hobby knife as needed.