ProTek RC "Blue Flame" DC Nitro Engine Heater (Head Warmer)

The ProTek RC “Blue Flame” DC Nitro Engine Heater pre-heats .19-.26 nitro engines to approximately 140°-160°F (60°-70°C) in about 10 minutes. Its temperature sensor regulates heater output, while the built-in safety timer automatically shuts the heater off after 10 minutes.

Pre-heating helps reduce stress on critical engine parts, supports smoother and easier start-ups, and can reduce on-track warm-up time. An adjustable fire- and heat-resistant cover, LED status indicator, and access port make the heater practical to use without removing it to start or monitor the engine.

Features

• 12V DC power source compatible with low voltage cutoff
• 90 Watt heating power
• Built-in temperature sensor controls heater power output
• 10 minute automatic safety timer
• LED indicator shows heating and low-voltage status
• High-efficiency heat transfer design
• Small, lightweight, and compact
• Adjustable fire- and heat-resistant cover
• Access port for starting and monitoring the engine
• Fits all .19-.26 nitro engines

Specifications

• Input Voltage: 12 Volt DC
• Connector: T-Style
• Heating Power: 90 Watt
• Heating Time: Approx. 10 Minutes
• Low Voltage Cutoff: 9-10 Volts
• Net Weight: 65g
• Dimensions: 63mm diameter x 50mm height
• Heating Temperature: Approx. 140°-160°F (60°-70°C)
• Current Draw: 7 amps with a 12 volt input
• LED Heating Indicator: Red LED remains lit
• LED Low-Voltage Indicator: Red LED blinks

Recommended Batteries

• ECP-LP-2200-3S30: EcoPower “Electron” 3S Li-Poly 30C Battery Pack (11.1V/2200mAh)
• ECP-LPS-4100-3S35: EcoPower “Electron” 3S Li-Poly 35C Battery Pack (11.1V/4100mAh)
• PTK-5150: ProTek R/C 3S “Supreme Power” Li-Poly 35C Battery Pack (11.1V/2200mAh)

Actual engine temperature and heating times may vary slightly based on power source and ambient temperature. This heater will not fit O.S. low profile cooling heads, such as PTK-2611.