ProTek RC 4S LiPo 20C Battery Pack (14.8V/2100mAh) (Starter Box)

The ProTek RC 4S LiPo battery pack delivers 14.8V nominal voltage and 2100mAh capacity for starter box use. It features a pre-installed T-Style Ultra connector with 14 GA wire and an Align/E-Flite compatible (XH) balance connector.

Specifications

• Type: Lithium Polymer
• Configuration: 4S1P
• Number of Cells: 4
• Capacity: 2100 mAh
• Voltage: 14.8V nominal
• Connector Type: T-Style Ultra (14 GA Wire)
• Balancer Type: Align/E-Flite compatible (XH)
• Weight: 221g
• Dimensions (WxLxH): 37 x 105 x 29mm
• Maximum Charge Rate: 2C (4.2A)
• Maximum Continuous Discharge: 20C (42A)
• Maximum Burst Discharge: 40C (84A) for 3 seconds

Charging and Storage Safety

• Always balance charge the battery using a Li-Poly specific charger.
• Do not leave the battery in your model or unattended while charging.
• Always use a LiPo charging bag.
• Do not over-discharge or over-charge the pack.
• The end voltage cannot be lower than 3.2V per cell.
• Do not expose the battery to sunshine or store or charge it above 35°C or in a closed car.
• If the battery becomes hot, allow it to cool completely before inspection and recharging.