ProTek RC 2S 150C Low IR SG3 HV ULCG Stick LiPo Battery (7.6V/6300mAh)

The ProTek RC 2S 150C Low IR SG3 HV ULCG Stick LiPo Battery delivers 7.6V and 6300mAh capacity in a stick-sized 2S1P configuration. Its Silicon Graphene 3rd generation high-voltage cell technology, low internal resistance, and 150C peak discharge capability are designed for consistent efficiency and punch, while the ULCG design helps reduce chassis roll and improve corner speed.

Features

• 2S stick-sized LiPo configuration
• 150C peak discharge capability
• Optimized weight balance for improved handling
• ULCG (Ultra-Low Center of Gravity) design
• Silicon Graphene 3rd generation high-voltage cell technology
• Lower IR for improved efficiency and punch
• Extended cycle life
• Ideal for 1/10 TC platforms
• ROAR Approved: Yes

Specifications

• Nominal Voltage: 7.6V (2S)
• Capacity: 6300mAh
• Maximum Charge Rate: 1.5C
• Discharge Rate, Peak: 150C
• Cell Configuration: 2S1P
• Watt Hours: 47.8Wh
• Battery Connector: 5mm Bullets
• Balance Connector: 2mm Bullet
• Dimensions (LxWxH): 5.4x1.8x0.76in (138x47x19.5mm)
• Weight: 8.32oz (236g)

Includes

• (1) 2S 150C Low IR SG3 HV ULCG Stick LiPo Battery (7.6V/6300mAh)
• (2) 5mm to 4mm Bullet Reducers
• (2) 5mm Bullet Connectors
• (1) 2mm Balance Bullet Connector

LiPo Safety

• Use a Li-Poly specific charger and always balance charge the battery.
• Do not leave the battery unattended while charging, leave it in a model during charging, or charge it without a LiPo Safe charging bag/box.
• Do not over-discharge or over-charge the battery. Discharging capacity cannot exceed 80% of the pack's maximum capacity after full charging.
• The end voltage cannot be lower than 3.2V per cell.
• Do not expose the battery to sunshine or store or charge it at temperatures above 35°C or in a closed car.
• If the battery becomes hot, allow it to cool completely for about 20 minutes and inspect it before recharging.