Kyosho MX-01 Mini-Z 4X4 Readyset w/Land Rover Defender 90 Body (Dark Green)

The Kyosho MX-01 Mini-Z 4X4 Readyset combines a factory-painted Land Rover Defender 90 body in Dark Green with a compact crawler chassis and KT-531P 2.4GHz transmitter. Its scale-focused design features solid axles, a ladder frame, coil-over shock absorbers, adjustable gearing and 4WD capability.

Features

• Factory-painted Land Rover Defender 90 body with fine details and thicker body material
• One-touch body mounting system with spring-wire retainers
• MX-01 ladder frame with steel vertical plates
• Solid front and rear axles with steel rods, captured rod ends, and metal ring and pinion gears
• Steel links and captured ball ends for the upper A-arms and lower links
• Coil-over shock absorbers with 360-degree spring retainers
• Adjustable wheelbase from 110mm to 120mm
• Ackermann steering geometry and drag link and tie rod steering components
• Six included pinion gears for gearing from 55.44:1 to 27.72:1
• Slipper clutch helps protect the drive system under excessive load
• 18 factory-installed full ball bearings
• 130 Class high-torque motor
• Built-in speed controller with an accessory port for the optional KYOMZW429R LED light set
• KT-531P transmitter with FHSS 2.4GHz operation, steering and throttle trim, steering dual-rate adjustment, LED control functions, and adjustable gyro effect
• Not compatible with conventional ASF/MHS/FHS 2.4GHz systems or KO I.C.S systems

Specifications

• Scale: 1/24
• Length: 185.8mm
• Width: 83mm
• Height: 104.0mm
• Wheel Base: 110mm
• Weight: 248.6g
• Chassis Type: MX-01
• Tread F/R: 72.7mm
• Motor/Engine: 130 Class
• Gear Ratio: 55.44:1 / 46.20:1 / 39.60:1 / 34.65:1 / 30.80:1 / 27.72:1
• Tire Diameter: 42.0mm
• Tire Width: 14.3mm
• Transmitter: Syncro KT-531P
• Battery: 4x AAA alkaline
• Running Time: Approx. 50 minutes

Includes

• Complete chassis with built-in electronics
• Factory-painted body complete with many fine details
• KT-531P 2.4GHz transmitter
• Six pinion gears: 10T, 12T, 14T, 16T, 18T, 20T
• Three motor spacers

Needed to Complete

• Four AAA batteries for the chassis, Alkaline or NiMH
• Four AAA batteries for the transmitter