EcoPower Intelligent 3S HV 4300mAh EC3 LiPo Battery/"Electron Mini" Charger

The EcoPower Intelligent 3S 4300mAh HV LiPo Battery and “Electron Mini” Charger Bundle provides a complete charging setup for the SCX10 series and other 1/10 crawlers. The charger automatically recognizes EcoPower Intelligent Batteries and uses simple Charge and Storage buttons for straightforward operation.

The Electron Mini supports LiPo, LiHV, and LiFe batteries and can adjust the charge rate for regular non-Intelligent batteries. A progress bar shows charging status, while the warning light system helps identify potential issues. The included 65W USB-C power supply enables up to 5A output on batteries up to 4S.

Features

• Intelligent battery recognition
• Simple two-button operation
• Supports LiPo, LiHV, and LiFe batteries
• Automatic charge rate adjustment for non-Intelligent batteries
• Progress bar display for charging status
• Warning light system for troubleshooting
• Compact and portable design
• Includes XT60 to EC3 and XT60 to EC5 charging cables

Charger Specifications

• Input Voltage: 5-20V
• Input Connector: USB-C
• Output Connector: XT60
• Supported Cell Count: 2-4S LiPo/LiHV/LiFe
• Charge Power: 60W
• Discharge Power: 3W
• Charge Current: 1-5A
• Balance Current: 0.3A/Cell
• Dimensions: 3.35x2.16x0.83in (85x55x21mm)

Battery Specifications

• Type: 3S HV LiPo
• Nominal Voltage: 11.4V (3S)
• Capacity: 4300mAh
• Cell Configuration: 3S1P
• Continuous Discharge: 50C
• Watt Hours: 49.0Wh
• Battery Connector: EC3
• Balance Connector: Intelligent Connector
• Dimensions: 3.6x1.6x1.14in (92x42x29mm)

Includes

• Intelligent 3S 4300mAh HV LiPo Battery
• “Electron Mini” Battery Charger
• 65W USB-C power supply
• XT60 to EC3 charging cable
• XT60 to EC5 charging cable
• Instruction manual

Important Safety Information

Always balance charge lithium batteries with a LiPo-specific charger and use a LiPo Safe charging bag or box. Do not leave a battery in your model or leave lithium batteries unattended while charging. Do not over-discharge or over-charge the battery. The ESC end voltage cannot be lower than 3.2v per cell. Do not expose batteries to sunshine or store or charge them above 35°C or in a closed car. If the battery becomes hot, allow it to cool completely before inspection and recharging.