EcoPower
EcoPower Intelligent 2S 450mAh PH2.0 LiPo Battery/"Electron Mini" Charger Bundle
EcoPower Intelligent 2S 450mAh PH2.0 LiPo Battery/"Electron Mini" Charger Bundle
Couldn't load pickup availability
The EcoPower Intelligent 2S 450mAh PH2.0 LiPo Battery and "Electron Mini" Charger Bundle provides a streamlined charging setup for the Axial SCX24, Furitek Cayman, FX118 and other mini crawlers. Intelligent battery recognition automatically selects suitable settings for EcoPower Intelligent Batteries, while the two-button interface provides Charge and Storage modes.
The charger supports LiPo, LiHV and LiFe batteries, and can automatically adjust the charge rate for non-intelligent batteries. A progress bar shows charging status, while the warning light system helps identify issues. The included 65W USB-C power supply enables up to 5A output on batteries up to 4S.
Features
- Intelligent battery recognition
- Simple two-button operation
- Supports LiPo, LiHV and LiFe batteries
- Automatic charge rate adjustment for non-intelligent batteries
- Progress bar display for charging status
- Warning light system for troubleshooting
- Compact and portable design
- XT60 to EC3, XT60 to EC5 and XT60 to PH2.0 charging cables included
Included
- Intelligent 2S 450mAh LiPo Battery
- "Electron Mini" Battery Charger
- 65W USB-C Power Supply
- XT60 to EC3 Charging Cable
- XT60 to EC5 Charging Cable
- XT60 to PH2.0 Charging Cable
- Instruction manual
Charger Specifications
- Input Voltage: 5-20V
- LiPo/LiHV/LiFe Cell Count: 2-4S
- Input Connector: USB-C
- Output Connector: XT60
- Charge Power: 60W
- Discharge Power: 3W
- Charge Current: 1-5A
- Discharge Current: Based on Battery Voltage
- Balance Current: 0.3A/Cell
- Dimensions: 3.35x2.16x0.83in (85x55x21mm)
Battery Specifications
- Nominal Voltage: 7.4V (2S)
- Capacity: 450mAh
- Continuous Discharge: 50C
- Cell Configuration: 2S1P
- Watt Hours: 3.3Wh
- Battery Connector: PH2.0
- Balance Connector: Intelligent Connector
- Dimensions (LxWxH): 2.18x1.17x0.34in (55.4x29.6x8.6mm)
Important LiPo Safety
Always use a Li-Poly specific charger, balance charge lithium batteries, and use a LiPo Safe charging bag or box. Do not leave lithium batteries unattended while charging or leave a battery in your model when charging. Do not over-discharge or over-charge the battery. Monitor race time or set a low voltage warning on the ESC; end voltage cannot be lower than 3.2v per cell. Do not expose the battery to sunshine or store or charge it above 35°C or in a closed car. If the battery becomes hot, allow it to cool completely, wait about 20 mins, and inspect it before recharging. Read and understand the instructions before operating this battery.
Share
