EcoPower "Electron" 3S 50C Intelligent LiHV Battery w/XT60 Connector

The EcoPower "Electron" 3S 50C Intelligent LiHV Battery provides 11.4V and 4300mAh capacity for 1/10 RC vehicles. Its intelligent technology is designed to work with the EcoPower "Electron Mini" charger (ECP-1007), which automatically identifies the battery type and adjusts charging settings.

Features

• Automatic identification and recording of all battery parameters
• Automated tracking and logging of battery parameters
• Adjustable charging parameters to improve safety
• Customizable charging settings
• Balance plug with integrated chip and proprietary design technology
• Designed to safeguard and prolong battery lifespan

Specifications

• Nominal Voltage: 11.4V (3S)
• Capacity: 4300mAh
• Maximum Charge Rate: 1C (4.3A)
• Continuous Discharge: 50C
• Peak Discharge: (Not Available)
• Cell Configuration: 2S1P
• Watt Hours: 49Wh
• ROAR Approved: No
• Battery Connector: XT-60
• Balance: Intelligent
• Dimensions (LxWxH): 3.62x1.65x1.14in (92x42x29mm)
• Weight: 8.57oz (243g)

Included

• (1) "Electron" 3S 50C Intelligent LiHV Battery

LiPo Safety Information

• Do not leave a battery in your model or leave lithium batteries unattended while charging.
• Always balance charge lithium batteries using a Li-Poly specific charger.
• Do not use NiMH or NiCD-only chargers.
• Do not over-discharge or over-charge the battery.
• Do not discharge more than 80% of the pack's maximum capacity after full charging.
• Fully charge a new battery before use and discharge it only 50% for the first 5 cycles.
• Do not allow end voltage to fall below 3.2v per cell.
• Do not expose the battery to sunshine or store or charge it above 35°C or in a closed car.
• If the battery becomes hot, allow it to cool completely before inspection and recharging.
• Read and understand the instructions before operating this battery.