EcoPower "Electron" 3S 20C LiPo Battery w/JST Connector

The EcoPower "Electron" 3S 20C LiPo Battery is designed for the Redcat® Ascent 18 Apex® platform. It delivers 11.1V and 200mAh capacity through a JST connector in a compact, lightweight pack.

Features

• 20C continuous discharge rating
• JST connector
• Compact and lightweight design
• 3S1P cell configuration

Specifications

• Nominal Voltage: 11.1V (3S)
• Capacity: 200mAh
• Maximum Charge Rate: 1C
• Continuous Discharge: 20C
• Cell Configuration: 3S1P
• Watt Hours: 2.77Wh
• Connector: JST
• Dimensions (LxWxH): 1.22x0.7x0.74in (31x18x19mm)
• Weight: 0.67oz (19g)

Included

• (1) 3S 20C LiPo Battery Pack (11.1V/200mAh) w/JST Connector

LiPo Safety Information

• Do not leave the battery in your model when charging.
• Do not leave lithium batteries unattended when charging.
• Always balance charge lithium batteries.
• Use a LiPo Safe charging bag or box.
• Use a Li-Poly-specific charger; NiMH or NiCD-only chargers will not work.
• Do not over-discharge lithium battery packs.
• Discharging capacity cannot exceed 80% of the pack's maximum capacity after full charging.
• Fully charge a new battery before use and discharge it only 50% for the first 5 cycles.
• Monitor race time or set a low-voltage warning on the ESC. End voltage cannot be lower than 3.2V per cell.
• Do not expose the battery to sunshine or store or charge it above 35°C or in a closed car.
• If the battery becomes hot during charging or use, allow it to cool completely for about 20 minutes and inspect it before recharging.
• Read and understand the instructions carefully before operating this battery.