EcoPower "Basher" 4S 100C Hard Case LiPo Battery w/EC5 (14.8V/5000mAh)

The EcoPower “Basher” 4S 100C Hard Case LiPo Battery delivers 5000mAh of capacity in a protective hard plastic case. Sized for Arrma, Losi and more, it features a stackable design for 4S and 8S use, plus an EC5 connector compatible with IC5.

Features

• Hard plastic case
• Stackable design
• 100C discharge rate
• 5000mAh capacity
• EC5 connector compatible with IC5
• Wire slots allow leads to sit flat when stacking two batteries for 8S use
• Balance lead and ESC wire spacing accommodates Arrma vehicles using the long inboard hook-and-loop strap

Specifications

• Type: Lithium Polymer
• Capacity: 5000mAh
• Voltage: 14.8V nominal
• Connector Type: EC5 Ultra (12GA Wire)
• Balancer Type: Align/E-Flite compatible (XH)
• Number of Cells: 4
• Weight: 420g
• Dimensions (WxLxH): 47x139x37mm
• Maximum Charge Rate: 2C (8.2A)

LiPo Battery Safety

• Do not leave the battery in your model when charging.
• Do not leave the battery unattended while charging.
• Always balance charge the battery using a Li-Poly specific charger. NiMH or NiCD-only chargers will not work.
• Do not over-discharge or over-charge the battery.
• Use a LiPo charging bag.
• Discharging capacity cannot exceed 80% of the pack’s maximum capacity after full charging.
• Fully charge a new battery before use and discharge it only 50% for the first 5 cycles.
• Monitor race time or set a low-voltage warning on the ESC. End voltage cannot be lower than 3.2v per cell.
• Do not expose the battery to sunshine or store or charge it above 35°C or in a closed car.
• If the battery becomes hot during fast charging or high-current discharging, allow it to cool completely for about 20 minutes and inspect it before recharging.
• Read and understand the instructions carefully before operating this battery.